As a homeowner, you know that something always needs repairs and fixes. From a leaky faucet to a clogged drain, plumbing problems can pop up when you least expect them. And while some plumbing issues are minor and easily fixable, others can be significant headaches (literally) that require the help of a professional plumber in Melbourne. To save you the stress of dealing with a plumbing disaster, we’ve compiled a list of the 8 most common plumbing problems and tips for a quick fix. So next time your plumbing goes awry, you’ll quit stressing and act.
One of the most common plumbing-related problems experienced by every homeowner is a drain that won’t drain. It can happen due to hair buildup, food particles or grease lodged in your pipes. To fix a slow drain, start by removing your drain cover and dislodging the obstruction with the help of a plunger. If the plunger doesn’t work, you may need to use a small pipe snake or an auger to remove the blockage. However, if none of the above works, call the nearest plumbers for blocked drain services so that they can detect and repair it.
A clogged toilet is every homeowner’s nightmare. Toilets can become blocked for various reasons, from too much toilet paper to objects flushed down the drain. But the good news is that they’re easy to fix. First, try using a plunger to see if that will dislodge the obstruction. If not, you may need to use an auger or a plumber’s snake.
Leaky faucets are annoying and can also waste a lot of water (and money!). Fixing a leaky faucet is simple; it’s as easy as replacing a worn-out washer or O-ring. However, suppose you’re not confident in your ability to fix the leak yourself. In that case, it’s always best to call in a professional performing leak detection in Melbourne to fix the problem quickly and efficiently.
A running toilet wastes water and can also drive up your water bill. If your toilet is constantly running, it’s likely because of a faulty flapper or fill valve. Luckily, both of these components are relatively easy and inexpensive to replace. However, if you need help determining what’s causing your toilet to run, it’s always the best idea to call in a professional who can take care of the problem quickly and efficiently.
Low Water Pressure
If you’ve ever stepped into the shower only to find that the water pressure has suddenly dropped, then you know how frustrating low water pressure can be. In most cases, low water pressure occurs due to sediment buildup in your pipes or fixtures, but leaks or holes in your pipes can also cause it. If you suspect that sediment buildup is causing your low water pressure, start by cleaning out your pipes with vinegar and hot water. If that doesn’t work, ring NLK Plumbing, a Melbourne-based professional plumbing service, to diagnose and solve the problem.
Faulty Water Heater
Water heater problems might bear the services of a plumber, an expert natural- gas professional, an electrician or any combination of the three. Some common issues include faucets giving way, causing the water heater to flood, tidying the girding area, or rust snooping with water rotation in the tank. But the most common problem with a water heater is that it doesn’t live up to its name, furnishing either too little hot water or none. Repairing a faulty water heater will require purchasing a few parts or replacing the appliance. The plumber in Melbourne shall be able to guide you about the right ways to fix water heater problems.
Failing Sewer Line
Frankly, the sewer line plumbing problem is a nightmare for many homeowners. Fixing this problem can be difficult and costly, depending on the location of the blockage. There are three main causes for this plumbing problem:
- The central duct may be clogged. To minimize this problem, monitor what you flush down the toilet. Diapers, face towels, napkins, and tissue paper are strictly prohibited.
- Tree roots could have gotten into the pipeline and pushed it out through the cracks in the pipe.
- Old sewers could collapse or break over time since these pipes are cast iron or mud.
For sewer lines, it’s better to opt for prevention rather than trying to fix it after facing the issue.
High Water Bills
A sudden increase in water bills can occur for several reasons. Every drop from one faucet equals under 6 gallons of water a day. Typical usage for a family of four is about 200 gallons per day. In one month, it will be 6,180 gallons instead of 6,000 gallons, with an additional 180 gallons over time. Weather can also affect your bill. Dry weather increases water usage as you will need more water for watering the lawn and other uses. Hence, you might see a sudden spike in your bill. You can offset rising bills or reduce static bills by installing things like water-saving faucets. Also, using less water is good for the environment.
Every home requires frequent repair and maintenance work so that the appliances and connections stay in the best condition and you don’t have to worry about emergency problems. From drains that won’t drain to leaky faucets, plumbing issues can pop up when you least expect them (and cause major headaches). To save yourself the stress of dealing with a plumbing disaster, always have a professional plumber in Melbourne to give a quick check and ensure that there is nothing to worry about.
NLK Plumbing, Your Trusted Plumber in Melbourne
NLK Plumbing is a team of professional plumbers with years of experience serving homes and businesses to have a stress-free plumbing supply. We install, maintain and repair your plumbing keeping it updated and damage-free. You can call us at 404 803 333 to learn more about our services.